Features & Benefits
Features – Pass Door
Welded aluminum frame with shiplap design affords added strength and durability while providing a weathertight door seal. Rain cap feature protects door entrance against accumulated water during rain showers.
Geared hinge ensures smooth operation and enhances the longevity of the pass door.
Commercial door closer ensures safe and quiet closure.
Continuous boxed channel bottom rail adds additional strength against the wind and horizontal deflection.
Features – Break-Away Bottom Section
Clopay’s Break-Away Bottom Section releases from the track and will swing up to a full 90-degree angle inward or 45 degrees outward, preventing further damage to the door.
Inside of section has fiberglass protective panel to prevent damage to the door.
Optional inside slide lock provides additional security. A padlock may be applied.
- Doors must have at least 24″ of hi-lift.
- 36″ of headroom required.
- Not compatible with door drop safety device/bottom brackets.
- Not compatible with doors requiring a double torsion shaft
Warranty: 1 Year Limited Construction
Features – 811
| Panel Design: | 2-1/2″ x 1-1/2″ aluminum frame |
| Panel Inserts: | 11 gauge galvanized steel chain link with 2″ diamond openings |
| Panel Thickness: | 1-1/2″ thick aluminum |
| Joint Design: | Flat block meeting rail |
| Thermal Conductivity: | None |
| Hardware: | Commercial grade hinges, rollers, and brackets |
| Colors: | Mill finished aluminum, powder coating optional |
| Limited Warranty: | 1-year material and workmanship |
Features – 812
| Panel Design: | 1-1/2″ or 1-7/8″ thick extruded aluminum rails |
| Panel Inserts: | 304 stainless steel in 12 x 12 or 30 x 30 mesh |
| Panel Thickness: | 1-1/2″ or 1-7/8″ thick |
| Joint Design: | interlocking rails |
| Thermal Conductivity: | None |
| Hardware: | Commercial grade hinges, rollers, and brackets |
| Colors: | Mill finished aluminum, powder coating optional |
| Limited Warranty: | 1-year material and workmanship |
Features – DS100/DS140
| Pad Design: | High-density polyurethane foam bonded to quality treated wood framing 22 oz, 40 oz or 50 oz vinyl-coated polyester fabric 24″ high head curtain with 24″ splits and hook & loop fasteners (DSI40 only) Full length 3″ wide yellow guide stripe on side panelsNylon mesh breather panels on side and head pads Side and top seals available with beveled edges |
| Colors: | Standard color is black. Optional brown, blue green (50 oz vinyl available black only) |
| Hardware: | Rust-resistant mounting hardware |
| Warranty: | 1 year |
Features DS200
| Pad Design: | Pressure treated wood framing with translucent fiberglass top and 32 oz vinyl sides 40 oz vinyl-coated fabric top and side face curtains mounted over a rigid frame Head curtain with vinyl-coated wear pleats at each end; sloped header to provide drainage; exterior frame corners trimmed with aluminum angle PVC bottom panels with highly visible yellow guide stripe |
| Colors: | Standard color is black. Optional brown, blue green (50 oz vinyl available black only) |
| Guards: | Two 6″ steel channel guards to support and protect frame |
| Hardware: | Rust-resistant mounting hardware |
| Warranty: | 1 year |
